Specifications

• Resolved Issues on page 13
• Documentation Updates on page 19
• Migration, Upgrade, and Downgrade Instructions on page 19
• Product Compatibility on page 20
Known Behavior
This section lists known behaviors, system maximums, and limitations in hardware and
software in Junos OS Release 13.3R6 for the EX Series.
For the most complete and latest information about known Junos OS defects, use the
Juniper Networks online Junos Problem Report Search application.
•
Layer 3 Features
•
Multicast
•
OpenFlow
Layer 3 Features
•
On EX9200 switches, BFD on IRB interfaces flaps if BFD is configured for subsecond
timers. PR844951
Multicast
•
If you configure a large number of PIM source-specific multicast (SSM) groups on an
EX9200 switch, the switch might experience periodic IPv6 traffic loss. As a workaround,
configure the pim-join-prune-timeout value on the last-hop router as 250 seconds.
PR853586
OpenFlow
•
On EX9200 switches, configuration of a firewall filter on an OpenFlow-enabled interface
is not supported.
•
On EX9200 switches, minor memory leaks might occur if you add and delete the same
multi-VLAN flow on the order of 100,000 such add and delete operations. PR905620
Related
Documentation
New and Changed Features on page 6•
• Changes in Behavior and Syntax on page 8
• Known Issues on page 12
• Resolved Issues on page 13
• Documentation Updates on page 19
• Migration, Upgrade, and Downgrade Instructions on page 19
• Product Compatibility on page 20
11Copyright © 2015, Juniper Networks, Inc.
Known Behavior