User manual

MTX-HSPA-PH8-P+G UMTS-HSPA terminal modem http://www.matrix.es
MTX-HSPA-PH8-P+G User Manual V.1.0 Pag. 7
Preliminary. Subject to change without prior notice
1.3 Main Features and Services
The MTX-HSPA-PH8-P+G perform a set of telecom services (TS) according to GSM standard phase 2+,
ETSI and ITU-T. The services and functions of the MTX-HSPA-PH8-P+G are implemented by AT commands
issued over the USB or ASC0 RS232 interface.
1.3.1 Types of Mobile Station
The MTX-HSPA-PH8-P+G is a UMTS/HSDPA and
GSM/GPRS modem with characteristics below:
Feature Implementation
General
Frequency bands Five-Band UMTS/HDPA+ 800/850/9002/1900/2100MHz
Quad-Band GSM/GPRS/EDGE 850/900/1800/1900 MHz
GSM class Small MS
Output power (according to
Release 99)
Class 4 (+33dBm ±2dB) for EGSM850
Class 4 (+33dBm ±2dB) for EGSM900
Class 1 (+30dBm ±2dB) for GSM1800
Class 1 (+30dBm ±2dB) for GSM1900
Class E2 (+27dBm ± 3dB) for GSM 850 8-PSK
Class E2 (+27dBm ± 3dB) for GSM 900 8-PSK
Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK
Class E2 (+26dBm +3 /-4dB) for GSM 1900 8-PSK
Class 3 (+24dBm +1/-3dB) for UMTS 2100, WCDMA FDD BdI
Class 3 (+24dBm +1/-3dB) for UMTS 1900,WCDMA FDD BdII
Class 3 (+24dBm +1/-3dB) for UMTS AWS, WCDMA FDD BdIV1
Class 3 (+24dBm +1/-3dB) for UMTS 900, WCDMA FDD BdVIII2
Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdV
Class 3 (+24dBm +1/-3dB) for UMTS 800, WCDMA FDD BdVI
Power supply
6V < VCC < 32V
Physical Dimensions: 78.1 x 66.8 x 37.2 mm Weight: approx. 190g
RoHS All hardware components fully compliant with EU RoHS Directive
HSPA features
3GPP Release 6, 7 DL 14.4Mbps, UL 5.7Mbps
UE CAT. 1-12 supported
Compressed mode (CM) supported according to 3GPP TS25.212
UMTS features
3GPP Release 4 PS data rate – 384 kbps DL / 384 kbps UL
CS data rate – 64 kbps DL / 64 kbps UL
GSM / GPRS / EGPRS features
Data transfer GPRS: • Multi-slot Class 12
• Full PBCCH support
• Mobile Station Class B
• Coding Scheme 1 – 4
EGPRS: • Multi-slot Class 12
• EDGE E2 power class for 8 PSK
• Downlink coding schemes – CS 1-4, MCS 1-9
• Uplink coding schemes – CS 1-4, MCS 1-9
• SRB loopback and test mode B
• 8-bit, 11-bit RACH
• PBCCH support
• 1 phase/2 phase access procedures
• Link adaptation and IR
• NACC, extended UL TBF
• Mobile Station Class B
CSD: • V.110, RLP, non-transparent
• 14.4kbps
• USSD