User manual

MTX-HSPA-PH8-P+G UMTS-HSPA terminal modem http://www.matrix.es
MTX-HSPA-PH8-P+G User Manual V.1.0 Pag. 5
Preliminary. Subject to change without prior notice
1. INTRODUCTION
1.1 Description
When your application needs to receive data up to 3.6 Mbps download or transmit up to 386Kbps, the
MTX-HSPA-PH8-P+G terminal is the solution based on HSDPA technology.
The HSPA (High Speed Downlink Packet Access) is a transmission standard based on the UMTS network
which allows a download speed of up to 3.6 Mbit/s. The technology therefore enables services like
broadband internet, e-mail access, high-speed download of large data files and streaming of videos or
music.
The MTX-HSPA-PH8-P+G is a complete terminal that encapsulates everything you need in one compact
plug-and-play unit. The integration is almost not needed because it has its own SIM card reader and a
USB port plus RS232 port which minimize the need for further hardware components.
The MTX-HSPA-PH8-P+G is controlled via AT commands and standard interfaces such as Serial RS232 &
USB 2.0 full speed and RIL/NDIS driver.
When the UMTS-HSDPA network operation is not present, the MTX-HSPA-PH8-P+G can operate in EDGE
class 10 max. 236.8 kpbs (DL), max. 118 kbps (UL) or in GPRS class 10: max. 85.6 kbps (DL), max. 42.8
kbps (UL)
The MTX-HSPA-PH8-P+G can also work in simple CSD data transmission (GSM data rate 14.4 kpbs, V.110,
UMTS data rate 57.6 kpbs V.120) as well Short Messaging (SMS) and FAX specifications. It also has an
analogue interface and is capable to make voice communication calls.
As a plus feature the MTX-HSPA-PH8-P+G adds a GPS receiver and NMEA protocol in the third multiplex
channel (MUX GSM 07.10 protocol is needed).
The MTX-HSPA-PH8-P+G is manufactured with SMD Technologies with the ISO 9001 & IS0 14001 Quality
certifications and it is RoHs / WEEE compliant.
A full list of antennas, cables, supplies and accessories are available.
The MTX-HSPA-PH8-P+G terminal is powered by an internal SIEMENS Wireless Module PH8.
Note! Some of the functions described inside this Technical Description are only possible when the SIM-
Card is inserted.
ORDERING INFORMATION & VERSION
ORDERING CODE: 199.801.087
Firmware Version: 2.050
Module inside: PH8 RELEASE 2