User manual

MTX-HSPA-PH8-P+G UMTS-HSPA terminal modem http://www.matrix.es
MTX-HSPA-PH8-P+G User Manual V.1.0 Pag. 23
Preliminary. Subject to change without prior notice
4.3 Operating States/LED
The modem has an LED which displays the operating status of the Terminal. An LED is provided for
signaling the module’s network connectivity status.
This status function has to be activated with AT^SLED=2. This command is VOLATILE; the configuration
is lost when the terminal shuts down. Please ensure to write it on the configuration & initialization string.
The following table shows the different operating status of the LEDS:
MTX-HSPA-PH8-P STATUS
GSM CS DATA CALL IN PROGRESS OR ESTABLISHED
- GSM VOICE CALL IN PROGRESS OR ESTABLISHED
- UMTS VOICE CALL IN PROGRESS OR ESTABLISHED
- UMTS CS DATA CALL IN PROGRESS
PERMANENTLY ON
- GSM PS DATA TRANSFER
- UMTS DATA TRANSFER
PERMANENTLY ON
UE REGISTERED TO A NETWORK. NO CALL, NO DATA
TRANSFER
PERMANENTLY ON
LIMITED NETWORK SERVICE (E.G. BECAUSE NO SIM/
USIM, NO PIN OR DURING NETWORK SEARCH)
500 MS ON /
500 MS OFF