User manual

MTX-HSPA-PH8-P+G UMTS-HSPA terminal modem http://www.matrix.es
MTX-HSPA-PH8-P+G User Manual V.1.0 Pag. 20
Preliminary. Subject to change without prior notice
3.7. SIM card reader
The MTX-HSPA-PH8-P+G Terminal is fitted with a SIM card reader and is designed for 1.8V and 3V SIM
cards 3GPP 31.102 and ETSI 102 221. It is the flip-up type which is lockable in the horizontal position and
is accessed through a removable panel as shown below:
The card holder is a five wire interface according to GSM 11.11. It has a SIM card detector switch to
detect whether or not the SIM card drawer is inserted.
Removing and inserting the SIM card during operation requires the software to be reinitialized. Therefore,
after reinserting the SIM card it is necessary to restart the MTX-HSPA-PH8-P+G Terminal.
The full operation of the MTX-HSPA-PH8-P+G relies on a SIM card being inserted. Some MTX-HSPA-PH8-
P+G functionality may be lost if you try to operate the control terminal without a SIM card.