Technical data

PLC Library SINAUT MICRO SC Flex Px
SINAUT MICRO SC
56 C79000-G8900-C210
DNS
(DWORD (Saving address of string))
IP addresses of DomainNameServer of GSM provider.
If two DNS servers are to be specified, these can be divided by semicolon (;)
(DNS1;DNS2), e.g. „194.25.2.131;193.254.160.1“.
CLIP
(DWORD (Saving address of string))
List of all valid dial-in numbers at the station. Several listing entries are divided by
semicolon (;). The sequence is specified, in each case three numbers for the dial-in
to the application (COM) and for the dial-in to the modem service-operation
(SERVICE).
<COM_CLIP_0>;<COM_CLIP_1>;<COM_CLIP_2>;<SERVICE_CLIP_0>;<SERVI
CE_CLIP_1>;<SERVICE_CLIP_2>
Only calls are accepted of valid phone numbers.
The entered numbers for SERVICE_CLIP and COM_CLIP must be different. If
same numbers has been entered the SERVICE_CLIP priority.
Wildcard characters (*) can be used for the definition of phone number groups.
Example:
[phone]* all numbers are accepted starting with [phone].
Caution
Enter as CLIP a phone number, which you can use to call the PLC or the SINAUT
MD720-3, to download a new software.
If you do not enter a CLIP, you cannot use this teleservice function.
BUSY
(BOOL)
0 Inactive
1 The initialization sequence is in process at the moment.
DONE
(BOOL)
1 The initialization has been successfully accomplished.