Technical data

SINAUT MICRO SC

C79000-G8900-C210

PLC Library SINAUT MICRO SC Flex Px

For wireless GPRS communication a GSM/GPRS-Modem SINAUT MD720-3 is

connected to the PLC S7-200.

The PLC library SINAUT MICRO SC Flex Px offers the possibility to communicate

with the OPC routing software SINAUT MICRO SC as well as with other control

systems via GPRS.

The PLC library differs in two variants:

• SINAUT MICRO SC Flex P0 communication via port 0

• SINAUT MICRO SC Flex P1 communication via port 1

At first use the PLC program module WDC_CONFIG_FLEX_Px to configure non-

volatile the GSM/GPRS-Modem SINAUT MD720-3.

After the configuration was successful, replace the PLC program module

WDC_CONFIG_FLEX_Px with the other PLC program modules of the PLC library

SINAUT MICRO SC Flex Px. These PLC program modules take the control of the

GSM/GPRS-Modem SINAUT MD720-3 and the communication with the OPC-

Server SINAUT MICRO SC in operational mode.

The PLC program modules are executable on the S7-200 CPUs 221, 222, 224,

224XP and 226.

The PLC library SINAUT MICRO SC Flex Px supports the PLC port 0 (x = 0) and

port 1 (x = 1).