Technical data

SINAUT MICRO SC
C79000-G8900-C210
35
PLC Library SINAUT MICRO SC
7
For wireless GPRS communication a GSM/GPRS-Modem SINAUT MD720-3 is
connected to the PLC S7-200. The GSM/GPRS modem is configured and
controlled by program modules of the S7-200.
The PLC library SINAUT MICRO SC offers the possibility to communicate with the
OPC routing software SINAUT MICRO SC“ as well as with other control systems
via GPRS.
Please observe too the PLC library PLC Library SINAUT MICRO SC Flex Px in
chapter 8.
PLC library SINAUT MICRO SC
All PLC program modules of the PLC library are used together to configure the
GSM/GPRS-Modem SINAUT MD720-3 and to communicate with the SINAUT
MICRO SC.
The PLC program modules are executable on the S7-200 CPUs 224, 224XP and
226.
The PLC library uses port 0 of the PLC.
PLC library SINAUT MICRO SC Flex Px
This PLC library includes a PLC program module for the configuration of the
GSM/GPRS-Modem SINAUT MD720-3 and several PLC program modules to
communicate with the SINAUT MICRO SC.
The PLC program modules for configuration and for control and communication are
used separately. That allows the PCL program to become smaller and therefore it
is executable on the S7-200 CPUs 221, 222, 224, 224XP and 226.