Technical data

SINAUT MD720-3
C79000-G8900-C210
7
Introduction
1
The software SINAUT MICRO SC and the GPRS-Modem SINAUT MD-720-3 meet
the following purpose:
Communication of S7-200 controls via GPRS
The SINAUT MICRO SC software is a OPC routing software with special
communication functions. These communication functions enables the SINAUT
MICRO SC to have data connections to remote S7-200 controls. For the
connections the GPRS (General Packet Radio Service) of GSM networks (Global
System for Mobile Communication) is used.
Via these GPRS connections, the remote S7-200 controls can communicate with
the OPC routing software or with other S7-200 controls being connected to the
SINAUT MICRO SC.
The S7-200 controls are connected by the GSM/GPRS modem SINAUT MD720-3
to the GPRS/GSM network.
This manual
Inside this manual, you will find all required information
• about the installation and the operation of the SINAUT MICRO SC software
and
• about the GSM/GPRS-Modem SINAUT MD720-3 in OPC mode.
A guide about the installation and the hardware of the SINAUT MD720-3 can be
found in the SINAUT MD720-3 manual.