Technical data

MD720-3 in OPC Mode
SINAUT MD720-3
54 C79000-G8900-C210
3. Then at the Ftp>-prompt enter: put !cmdfile
Press Enter.
After the firmware file and the !cmdfile file are successfully uploaded the
SINAUT MD720-3 will start to install the new firmware. This process can last
up to 10 minutes. After this the SINAUT MD720-3 restarts. Then the SINAUT
MD720-3 is ready again.
To tear-down the service connection
Tear-down the local service connection when you do not use it any more.
1. At the Ftp>-prompt enter: quit
Then press Enter.
2. Then also tear-down the network connection to the device. To do so right-click
the icon in the Windows task bar.