Technical data

SINAUT MD720-3
C79000-G8900-C210
17
To establish the system
4
Approach
1. Get the necessary information about the your internet and GPRS access, see
Necessary information, chapter 3.5.
2. Install the OPC Routing Software SINAUT MICRO SC, see Installation SINAUT
MICRO SC, chapter 5.
3. Open the configuration tool Sie and configure the stations, see SINAUT
MICRO SC configuration, chapter 7.
4. Define the entries for the SPS program modules WDC_INIT, see PLC
Program modules, chapter 8.1. Please observe, that the definition die need to
correspond to the entries made in the configuration tool.
5. Compile the SPS program and transfer it to the SPS.
6. Insert the SIM-Karte in the GPRS modem MD 720-3 and install it, see system
manual SINAUT MD720-3.
7. Connect the GPRS modem SINAUT MD720-3 with the SPS via the PPI
adapter, see Connect / Setup the PPI adapter, chapter 9.1.
8. Connect the modem SINAUT MD720-3 to the power supply and switch on the
SPS.
9. When the modem SINAUT MD720-3 and the OPC routing software has
establish the connection, the connection status will be indicated as „yellow“.
10. When the SPS has connected to the OPC routing software, the connection
status will be indicated as „green“.