Technical data

SINAUT MD720-3

C79000-G8900-C210

Operating condition

3.1 Reachability of SINAUT MICRO SC

The computer running the OPC routing software SINAUT MICRO SC needs to be

reachable from the GPRS network permanently. Therefore this computer needs to

be connected directly to the GPRS or must permanently be reachable in the

internet by DSL for example.

Caution

If the OPC routing software SINAUT MICRO SC is not reachable, the GPRS/GSM

modems SINAUT MD720-3 try again and again to connect to the SINAUT MICRO

SC. This generates data volume through GPRS with costs.

Avoid any times, when the SINAUT MICRO SC is turned-off or not reachable.

3.2 Firewall

Like any other computer being connected to the internet or another public IP

network, you must protect the OPC server by a firewall against attacks coming

through the connected network.

Please ensure that the configured Server Port (Default 26862; refer to 7.1

Configuration tool) is not blocked by the firewall. Otherwise the trials of the

GPRS/GSM modems to connect via GPRS will generate data volume with costs.