Technical data

Configuration software for SINAUT ST7
1.9 Subscriber administration in the SINAUT configuration tool
Software
System Manual, 07/2009, C79000-G8976-C222-07
99
Properties- Poll list entry dialog
Figure 1-52 Properties- Poll list entry dialog
The Identification area displays the following properties:
●
subscriber :
The
subscriber output box displays the polling subscriber (master TIM) with its subscriber
number, module name, and station name.
●
polls subscriber :
The
polls subscriber output box displays the polled subscriber with its subscriber number,
module name, and station name.
●
station address :
The
station address output box displays the station address of the polled subscriber.
●
interface :
The
interface output box displays the interface type (internal/external) of the polled
subscriber.
The
Properties area displays the following options:
●
polling in :
Options:
main cycle , sub cycle
Depending on the selected option, the CPU module is polled in the main or sub cycle.
●
polling is :
Options:
enabled , disabled
If the
enabled option is selected, polling the CPU module in polling mode is enabled.
Otherwise polling is disabled.