Technical data

Configuration software for SINAUT ST7
1.9 Subscriber administration in the SINAUT configuration tool
Software
94 System Manual, 07/2009, C79000-G8976-C222-07
● Name shows the default name of the module or the name assigned in network
configuration
●
Station displays the set network node type
● The
subscriber number is displayed
●
Status from displays the date of the last configuration
● The
date created is displayed.
●
Basic type displays the network object type from the network configuration
●
Extended type displays the extended network object type adopted in the network
configuration (for example ST7-CPU, ST7-TIM, ST7cc or SMS center)
1.9.5 "Partners" tab
Partners tab
This tab lists the connection partners of the selected module with subscriber number, module
type, name and station name.
1.9.6 "Connections" tab
Connections tab
This tab lists all the configured local connections over LAN along with their most important
properties for the current subscriber:
● X connections
Unconfigured S7 connections that use the SFCs "X_SEND" and "X_RCV".
● PBC connections
Configured S7 connections that use the SFBs "BSEND" and "BRCV".
● CR connections
Read/write connections of the TD7 software "TD7onTIM" to the local CPU that do not
require S7 connections.
● MSC connections
Connections for the MSC protocol that do not require S7 connections.