Technical data

Configuration software for SINAUT ST7
1.7 The SINAUT Configuration Tool
Software
80 System Manual, 07/2009, C79000-G8976-C222-07
1.7.2 Starting the SINAUT Configuration Tool
Introduction
The SINAUT ST 7 Configuration Tool is started in the Start / SIMATIC / SINAUT ST7 /
Configuration
menu.
At the start of configuration, you open a project with the
Project / Recently Used menu or the
Open Project button in the toolbar.
After selecting the project, the
SINAUT ST7: Configuration dialog opens making the three
following main functions of the SINAUT Configuration Tool available:
●
Connection Configuration for SINAUT connections
●
Subscriber Administration for SINAUT subscribers
●
SINAUT ST1 - Configuration Overview
For more information on SINAUT ST1, refer to release 05/2007 of the manual.
Figure 1-40 Selection dialog of the SINAUT Configuration Tool
To continue configuration, first select the Connection Configuration option.
When the SINAUT Configuration Tool is open, you can change between the three functions
using:
● The
SINAUT / ... menu,
● The corresponding buttons in the toolbar or
● the following function keys:
– F3 for
Connection Configuration
– F4 for
Subscriber Administration
Program information and SINAUT Internet pages
You can display program version and copyright information in the About dialog of the
SINAUT configuration tool that can be opened using the
Help / About menu.
With the Internet address
www.sinautst.de at the top right in the SINAUT About dialog, you
can open the SINAUT home page directly.