Technical data

ManualsBrandsMatrix ManualsKitchen AppliancesMD720

Configuration software for SINAUT ST7

1.7 The SINAUT Configuration Tool

Software

System Manual, 07/2009, C79000-G8976-C222-07

Configuration continues by calling the SINAUT configuration tool.

Note

From the network configuration, not only the

Save

but also the

Save and Compile...

function

can be called that generates the system data blocks (SDB) after saving the configuration.

To acquire all the configured parameters of the TD7 software when generating the SDBs

both in new projects or when making modifications to the configuration of existing SINAUT

installations, the generation of SDBs for SINAUT networks should only be performed in the

Subscriber Administration

of the SINAUT configuration tool.

1.7 The SINAUT Configuration Tool

1.7.1 Working with the SINAUT ST7 configuration tool

The SINAUT ST 7 configuration software fits into the familiar Windows sequences. This

means that functions such as

● Window technology

● Menu bar

● Toolbar

● Online help for the dialogs of the configuration software

● Online help for the TD7 blocks

● Printing

are integrated according to the Windows and STEP 7 standards. Working with the

configuration tool is explained in the individual sections of the chapter.

General information on working with the tool

You select a menu or a graphic object by clicking once with the left mouse button.

Further functions for this object are then available over the menu bar, over the buttons of the

toolbar or often over a context menu that opens when you select an object with the right

mouse button.

The buttons for the properties dialogs available for configuration have the following functions:

●

OK:

Confirms the entries made and closes the dialog.

●

Cancel:

Entries made are ignored and the dialog is closed.

The

Cancel

button is not available in the dialogs for subscriber administration in the

SINAUT configuration tool. In this case, the dialog is closed without entering changes by

clicking on the close button [x] in the right-hand top corner of the header line of the dialog.

●

Help:

Opens the online help.