Technical data

Configuration software for SINAUT ST7
1.6 Configuring networks and network nodes in STEP 7 / NetPro
Software
System Manual, 07/2009, C79000-G8976-C222-07
65
General tab
Figure 1-32 Properties - SINAUT Dedicated Line TIM dialog, General tab
The following parameters are available in the
General tab:
● The
Name box displays the name of the module in SIMATIC stations. You can only
change the default interface name in SIMATIC PC stations and other stations. A new,
modified name appears in the SIMATIC Manager and in the network configuration.
● The
Project path is displayed.
● The
Storage location of the project is displayed.
● In the
Author input box, you can enter the person who created the configuration.
● The
Date created is displayed.
● The
Date of the last modification is displayed.
● In the
Comment input box, you can enter comments of up to 254 characters.