Technical data

Configuration software for SINAUT ST7
1.6 Configuring networks and network nodes in STEP 7 / NetPro
Software
System Manual, 07/2009, C79000-G8976-C222-07
63
● Name:
The
Name box displays the name of the module.
● The
Project path is displayed.
● The
Storage location of the project is displayed.
● In the
Author input box, you can enter the person who created the configuration.
● The
Date created is displayed.
● The
Date of the last modification is displayed.
● In the
Comment input box, you can enter comments of up to 254 characters.
Parameters tab
Figure 1-31 Properties - Ethernet interface dialog, Parameters tab
The
Parameters tab provides the following parameters:
●
Set MAC address / use ISO protocol :
Since an Ethernet TIM does not use the ISO protocol but TCP/IP, this option remains
disabled.
● The
IP address :
This cannot be changed here.