Technical data

Configuration software for SINAUT ST7
1.6 Configuring networks and network nodes in STEP 7 / NetPro
Software
System Manual, 07/2009, C79000-G8976-C222-07
61
change the default interface name in SIMATIC PC stations and other stations. A new,
modified name appears in the SIMATIC Manager and in the network configuration.
● The
Project path is displayed.
● The
Storage location of the project is displayed.
● In the
Author input box, you can enter the person who created the configuration.
● The
Date created is displayed.
● The
Date of the last modification is displayed.
● In the
Comment input box, you can enter comments of up to 254 characters.
Parameters tab
Figure 1-29 Properties - MPI interface dialog, Parameters tab
The Parameters tab provides the following parameters:
● The network
address in the local MPI network.
The address of the network node can be modified. There is a consistency check which
blocks network addresses that have already been assigned.
● The
highest MPI address in the network is displayed.