Technical data

SINAUT PG Routing
4.3 Application of PG routing
Software
442 System Manual, 07/2009, C79000-G8976-C222-07
Step 4:
Download the newly compiled SDBs to the TIM module TIM 3 c and then activate the SDBs
by running a restart on the TIM module.

1RGH
VWDWLRQ
0DVWHUVWDWLRQ
6WDWLRQ
6'%
6'% 6'%
03,
03,
03,
:$1
:$1
:$1D :$1E
:$1F :$1G :$1H
:$1
7,0D
03, 03,
',
'2
$,
$2
',
'2
$,
$2
&38

&38

&38

&38

03,
:$1 :$1 :$1 :$1
7,0E
7,0
D
:$1
',
'2
$,
$2
7,0
E
:$1
',
'2
$,
$2
7,0
F
7,0F
3*
6'% 6'%
6'%
Figure 4-8 Step 4 of central SDB download in the sample configuration
TIM 3 c is now also routing-compliant. The CPU module attached to TIM 3 b can now be
remotely programmed.
4.3 Application of PG routing
Before you perform PG routing over the SINAUT telecontrol network with your PG of PC, you
must first adapt the properties of the PG/PC interface and set the assignment of the PG/PC
in the SINAUT network.
4.3.1 Properties of the PG/PC interface
Adapting the PG/PC interface
1. Open the Control Panel window by clicking on the Start / Settings / Control Panel menu.
2. Select the
Set PG/PC interface icon.
3. In the
Set PG/PC Interface dialog, set the MPI interface in the Interface parameter
assignment used
field.
4. Then click on the
Properties button.