Technical data
SINAUT PG Routing
4.1 What is PG Routing?
Software
430 System Manual, 07/2009, C79000-G8976-C222-07
Note
In the remainder of this chapter, the terms
PG routing
and
remote
are used with the following
meaning:
• PG routing
PG routing is PG routing over network types such as MPI, PROFIBUS, and Ethernet as
well as SINAUT networks.
• Remote
A remote CPU or remote TIM is a module that can be accessed from a PG over SINAUT
telecontrol networks.
4.1.2 Examples of configuration for PG routing
The following figures illustrate the basic principle of PG routing based on configurations.
Basic configuration of PG routing
In the basic configuration, a PG in the master station is configured and connected to the MPI
bus. PG routing extends from the master TIM over a SINAUT network (WAN) to a station
TIM over which the CPU connected to it can be reached.
&38
7,0
&38
7,0
&38
7,0
7,0
0DVWHUVWDWLRQHJ6
:$1
3*
03,
Figure 4-1 Basic configuration of PG routing