Technical data

SINAUT Diagnostics and Service tool
3.7 Messages in the diagnostic buffer of the CPU
Software
428 System Manual, 07/2009, C79000-G8976-C222-07
No. Event ID
(hex)
Meaning
85 B155 Receive job of local subscriber no. [Info1] failed. The job will be repeated. Communication DB no. =
[Info2].
Request displays
96 B160 General request to subscriber no. [Info1] incomplete.
97 B161 Single request to subscriber no. [Info1] incomplete.
98 B162 Error in general request to object no. [Info1]. Source subscriber no. = [Info2/3].
99 B163 Error in single request to object no. [Info1]. Source subscriber no. = [Info2/3].
Command/setpoint displays
112 B170 Command input error for object no. [Info1]: Simultaneous input over hardware and software input.
113 B171 Command input error for object no. [Info1]: 1-out-of-8 error.
114 B172 Command/setpoint input error for object no. [Info1]: 1-out-of-n error. Additional info: [Info2/3] (0 =
Comm. or Setp.; 1 = Comm.; 2 = Setp.)
115 B173 Command output error for object no. [Info1]: Command and control byte not identical.
116 B174 Command output error for object no. [Info1]: 1-out-of-8 error.
117 B175 Command output error for object no. [Info1]: 1-out-of-n error.
Time displays
128 B180 Daylight saving/standard time changeover at change of day not permitted.
129 B181 Date/time error when setting the CPU clock. Incorrect date: [Info1].
130 B182 Date/time error when setting the CPU clock. Incorrect time: [Info2/3].
131 B183 Time synchronization disrupted on CPU.
Processing errors
144 B190 Data loss in object no. [Info1]. Last received data was not processed by typical.
145 B191 Received data loss in subscriber object no. [Info1]. Last received data was not processed by
BasicTask.
Operating displays
160 B1A0 Initialization of subscriber no. [Info1] completed.