Technical data

SINAUT Diagnostics and Service tool
3.6 Messages in the diagnostic buffer of the TIM
Software
422 System Manual, 07/2009, C79000-G8976-C222-07
Event ID
(hex)
Detailed
event
(hex)
Meaning
F560 0725 TD7-SDB: No objects found in header ID.
F560 0726 TD7-SDB: Unknown format in an object.
F560 0729 TD7-Par: Not enough memory for scan cycle job list.
F560 072A Basic channel memory assignment error.
F560 072D TD7-Par: Wrong channel data type.
F560 072E Unknown channel type.
F560 0730 TD7-Par: Invalid scan cycle ID.
F560 0731 Memory assignment error creating the object list for the current subscriber.
F560 0732 TD7-SDB: Number of objects does not match the number of objects in the header.
F560 0733 A read job to the CPU was not responded to after 1 ms.
F560 0736 TD7-Com: CPU communication error in object X, channel Y.
F560 0737 TD7-Com: CPU access error for object X, channel Y.
F560 073B Memory assignment error creating the message buffer for a scan cycle.
F560 073D A write job to the CPU was not responded to after 1 ms.
F560 073E TD7-Com: Negative acknowledgment from LAN communication for job from scan cycle.
F560 0742 TD7-Run: Error reading an input trigger.
F560 0744 TD7-Par: Object without channels.
F560 074A TD7-Par: Invalid address with trigger signal.
F560 074B TD7-Par: Invalid address for net data in object X, channel Y.
F560 074C An invalid address was reported for object X in channel Y.
F560 0752 TD7-SDB: Number of subscriber blocks does not match main header entry.
F560 0755 Unknown channel type.
F560 0759 Not enough memory to create the TD7onTIM send job list.
F560 0760 Initialization of TD7onTIM for source subscriber complete.
F560 0761 The general request of a subscriber is incomplete.
F560 0762 Timeout in the general request to a subscriber.
F560 0763 The general request of object X of a destination subscriber is incomplete.
F560 0766 Message with unknown source subscriber.
F560 0767 Unknown start index in received organizational message.
F560 0768 TD7-Run: Received organizational message not accepted due to invalid length.
F560 076C Invalid start index in received data message.
F560 076D TD7-Run: Received data too large for destination object.
F560 076E TD7-Run: Start index of received data message does not match the receive channel of the
destination object.
F560 0773 TD7-Run: Object without partner or channels.
F560 0774 TD7-Run: No destination object found.