Technical data

SINAUT Diagnostics and Service tool
3.6 Messages in the diagnostic buffer of the TIM
Software
System Manual, 07/2009, C79000-G8976-C222-07
421
Event ID
(hex)
Detailed
event
(hex)
Meaning
F360 06C0 SDB5.SDB cannot be written.
Messages from the SDB handler
F560 06E0 Installation of the SDB handler aborted.
F560 06E1 SDB could not be copied.
F560 06E2 SDB could not be deleted.
F560 06E3 SDB could not be loaded.
F560 06E4 SDB information of hierarchy 1 not available.
F560 06E5 SDB information of hierarchy 2 not available.
F560 06E6 SDB information of hierarchy 3 not available.
F560 06E7 Error chaining SDBs.
F360 06E8 SDB handler: Unknown job.
F360 06E9 Control instruction unknown.
F560 06EB Error occurred during firmware update.
TD7onTIM messages
F560 Entering state: TD7 installation started.
F460
0700
Exiting state: TD7 installation ready.
F560 0701 Semaphores not created.
F560 0702 Semaphores not created.
F560 0703 SecIntervall task was not started.
F560 0704 TD7_ObjectAdmin task was not started.
F560 0705 The path for SDB files could not be opened.
F560 0706 The TD7 SDB could not be found.
F560 0707 The TD7 SDB could not be opened.
F560 0708 Header with incorrect length of block ID.
F560 0709 TD7-SDB: No TD7 parameters found.
F560 070A TD7-SDB: Block not found.
F560 070B TD7-SDB: T4T_MAINHDR has incorrect length.
F560 070C TD7-SDB: T4T_SUBDATA has incorrect length.
F560 070E TD7-SDB: Unknown format in a destination subscriber block.
F560 0711 TD7-SDB: Number of partner blocks incorrect.
F560 0712 TD7-SDB: Unknown format in a partner block.
F560 0713 TD7-SDB: Unknown channel type.
F560 0715 TD7-Run: Not enough memory for the channel list.
F560 0716 TD7-SDB: Channel block not found.
F560 0717 TD7-Run: Not enough memory for a channel object.
F560 0718 TD7-SDB: The number of data entries is incorrect.
F560 071B TD7-SDB: The number of object entries is incorrect.
F560 071C TD7-Par: Subscriber object for a partner not found.
F560 071D TD7-Par: Unknown partner.
F560 0721 TD7-Par: Invalid scan cycle ID.
F560 0722 TD7-Run: Object not in fast cycle.