Technical data

SINAUT Diagnostics and Service tool
3.6 Messages in the diagnostic buffer of the TIM
Software
420 System Manual, 07/2009, C79000-G8976-C222-07
Event ID
(hex)
Detailed
event
(hex)
Meaning
F560 063E Error in synchronization request.
Messages from diagnostic server
F560 0660 Error occurred installing the diagnostic server.
F360 0661 Installation of diagnostic server completed.
F560 0662 Error occurred sending a message.
F560 Entering state: Error occurred receiving a message.
F460
0663
Exiting state: Error occurred receiving a message.
F560 Entering state: Heap memory overflow.
F460
0664
Exiting state: Heap memory overflow eliminated.
F960 Entering state: Unknown PDU received.
F860
0665
Exiting state: Unknown PDU received.
F560 0666 Incorrect firmware version installed on TIM.
F360 Entering state: All [n] LAN connections are disrupted.
F260
0667
Exiting state: [x] of [n] LAN connections are OK.
F360 0668 Message buffer of TIM records was deleted.
F360 Entering state: ST7 Message Monitor on
F260
0669
Exiting state: ST7 Message Monitor off
F360 Entering state: Extended diagnostics on
F260
066A
Exiting state: Extended diagnostics off
F360 066B Extended diagnostics - modification
F360 066C Error occurred in system status list query.
F560 066D Wrong firmware.
Messages from P bus server
F560 06B0 Installation of P bus server aborted.
F360 06B1 Unknown message received from task.
F560 06B2 Error occurred receiving a message.
F360 Entering state: Power outage on P bus.
F260
06B3
Exiting state: Power supply on P bus OK.
F360 Entering state: I/O disabled by CPU.
F260
06B4
Exiting state: I/O enabled by CPU.
F560 06B5 Module on P bus not capable of communication.
F960 06B6 Parity error in P bus communication.
F960 06B7 Bit shift error in P bus communication.
F360 06B8 Diagnostic interrupt cannot be sent. Module is not enabled on P bus.
F360 06B9 Diagnostic interrupt cannot be sent. Diagnostic interrupt is not enabled on P bus.
F360 06BA SDB0.SDB cannot be opened. File overwritten without comparison.
F360 06BB SDB0.SDB cannot be created.
F360 06BC SDB0.SDB cannot be written.
F560 06BD BUS3-ASIC could not be initialized.
F360 06BE SDB5.SDB cannot be opened. File overwritten without comparison.
F360 06BF SDB5.SDB cannot be created.