Technical data

SINAUT Diagnostics and Service tool
3.6 Messages in the diagnostic buffer of the TIM
Software
System Manual, 07/2009, C79000-G8976-C222-07
415
Event ID
(hex)
Detailed
event
(hex)
Meaning
F460 Exiting state: Internal / external WAN interface: USART error eliminated.
F360 Entering state: Subscriber failed.
F260
030B
Exiting state: Subscriber OK.
F360 Entering state: Internal / external WAN interface: WAN driver disabled.
F260
030C
Exiting state: Internal / external WAN interface: WAN driver enabled.
F360 Entering state: Internal / external WAN interface: Subscriber call disabled.
F260
030D
Exiting state: Internal / external WAN interface: Subscriber call enabled.
F360 Entering state: Internal / external WAN interface: Subscriber call in subcycle.
F260
030E
Exiting state: Internal / external WAN interface: Subscriber call in main cycle.
F360 Entering state: Internal / external WAN interface: Permanent call to a subscriber enabled.
F260
030F
Exiting state: Internal / external WAN interface: Permanent call to a subscriber ended.
F360 Entering state: Internal / external WAN interface: Lack of resources on a subscriber.
F260
0310
Exiting state: Internal / external WAN interface: Lack of resources on a subscriber eliminated.
F360 Entering state: Internal / external WAN interface: Alternative path changeover on.
F260
0311
Exiting state: Internal / external WAN interface: Alternative path changeover off.
F560 0312 Internal / external WAN interface: No message memory available for new image element.
F560 0313 Internal / external WAN interface: Image element too large for image memory.
F560 0314 Internal / external WAN interface: Set number of subscribers exceeded in image.
F560 0316 Internal / external WAN interface: 'List of Active Stations' (LAS) not available.
F560 0317 Internal / external WAN interface: Error receiving a message.
F560 0318 Internal / external WAN interface: Error enabling message memory.
F560 Entering state: Internal / external WAN interface: Communication with AMPLUS-L task
disrupted.
F460
0319
Exiting state: Internal / external WAN interface: Communication with AMPLUS-L task OK.
F560 Entering state: Internal / external WAN interface: Communication with clock driver disrupted.
F460
031A
Exiting state: Internal / external WAN interface: Communication with clock driver OK.
F560 Entering state: Internal / external WAN interface: Communication with routing task disrupted.
F460
031B
Exiting state: Internal / external WAN interface: Communication with routing task OK.
F560 031C Internal / external WAN interface: Modem command invalid.
F560 031D Internal / external WAN interface: Invalid dialing string or bad call number transferred to
modem when calling a subscriber.
F960 031E Internal / external WAN interface: Incorrect handshake PDU received from a subscriber.
F360 031F Internal / external WAN interface: Own telephone connection occupied.
F960 0320 Internal / external WAN interface: Modem not replying.
F960 0321 Internal / external WAN interface: Access to called subscriber not permitted.
F960 0322 Internal / external WAN interface: No answer tone received from modem of called subscriber.
F960 0323 Internal / external WAN interface: Called subscriber is not operational.
F960 0324 Internal / external WAN interface: Modem of called subscriber has no power.
F960 0325 Internal / external WAN interface: Telephone line is disrupted.
F360 0326 Internal / external WAN interface: Supervision time exceeded. Repetition starting.