Technical data

SINAUT Diagnostics and Service tool
3.6 Messages in the diagnostic buffer of the TIM
Software
414 System Manual, 07/2009, C79000-G8976-C222-07
Event ID
(hex)
Detailed
event
(hex)
Meaning
F560 0116 Ethernet SDB with bad block ID received.
F560 0117 Error creating a socket.
F560 0118 Error linking a socket.
F560 0119 Invalid socket.
F560 011A Error listening on a socket.
F560 011B Ethernet port: RFC1006 has received a packet whose length exceeds the maximum.
F560 011C Bad RFC1006 PDU header.
F560 011D Undefined PDU received.
F560 011E Bad TCP/IP packet.
F560 011F Error setting a socket.
F560 0120 Error in ACCEPT socket.
F560 0121 TCP/IP connection termination by partner.
F560 0122 TCP/IP reception error.
F560 0123 TCP/IP send error.
F560 0124 TCP/IP connection number invalid.
F560 0125 Error receiving a CR-PDU.
F560 0126 Illegal access over TCP/IP.
F560 0127 Invalid PDU length.
F560 0128 KEEPALIVE expired.
F560 Entering state: Connection information: Ethernet port problem.
F460
0129
Exiting state: Connection information: Ethernet port ok.
F560 012A Error in socket CONNECT job.
F560 012B Error receiving a CC-PDU.
F560 012C Unknown error code.
F560 012D Maximum number of S7 connections exceeded.
WAN messages
F560 0300 Internal / external WAN interface: Installation of the WAN driver was aborted.
F360 0301 Internal / external WAN interface: WAN driver is installed.
F360 0302 Internal / external WAN interface: Connection to a subscriber established (incoming call;
subscriber number identified).
F560 0303 Bad organizational message from routing task.
F360 Entering state: Internal / external WAN interface: Send buffer changed over to image.
F260
0304
Exiting state: Internal / external WAN interface: Send buffer changed back from image.
F360 Entering state: Internal / external WAN interface: Send buffer overflow occurred.
F260
0305
Exiting state: Internal / external WAN interface: Send buffer overflow eliminated.
F960 0306 Bad message: max. number of destination subscribers exceeded.
F960 0307 Bad message: Unknown source subscriber number.
F960 0308 Bad message: S7 PDU not with AE ID = 2.
F960 Entering state: Internal / external WAN interface: CTS disturbance occurred on modem.
F860
0309
Exiting state: Internal / external WAN interface: CTS disturbance eliminated on modem.
F560 030A Entering state: Internal / external WAN interface: USART error occurred.