Technical data

SINAUT Diagnostics and Service tool
3.5 Message protocol diagnostics
Software
System Manual, 07/2009, C79000-G8976-C222-07
409
With the aid of the statistics, you can, for example recognize particular concentrations of
certain message types with individual subscribers allowing you to decide whether normal or
acceptable message traffic is possible in the particular installation.
The
Statistics dialog displays the statistical data of the TIM message protocol in three tabs.
In each tab, the sampling period of message recalling is displayed at the top. The three tabs
of the dialog list the messages as tables sorted according to the following:
● The
Counters tab provides information on the total number of messages and the number
of different sent and received message types.
● The
Message flow tab provides information on the amount of message traffic per minute.
It shows the total number of messages and the number of different sent and received
message types per minute.
● The
Subscriber tab displays a table with the number of different message types per
subscriber. With the list box at the top right, you can sort the messages according to
subscriber number or message type.
Figure 3-42 Statistics dialog, Subscriber tab
The
Statistics function is only available for individual message protocols (sources) and is not
supported, for example, a Testcopy DB or ST7cc protocol was inserted in a TIM message
protocol.