Technical data

SINAUT Diagnostics and Service tool
3.5 Message protocol diagnostics
Software
400 System Manual, 07/2009, C79000-G8976-C222-07
3.5.2 ST7cc / ST7sc protocol
Description of the functions
The recording of the message traffic between SINAUT subscribers and an ST7cc or ST7sc
control center is possible in ST7cc or ST7sc using the trace. The function of the trace is
explained in the
SINAUT ST7cc Control Center Manual . This contains precise information on
starting the trace functions, displaying messages in the output window, activating the trace
output files and other functionalities.
Operator activities
1. Open the ST7cc or ST7sc protocol by selecting the Project / ST7cc/ST7sc Protocol
menu. The
Open dialog is displayed.
2. In the file tree, select the directory and the
7DS file of the ST7cc or ST7sc message
protocol you require and confirm with the
Open button.
The message protocol opens in a separate window.
Working in the open ST7cc or ST7sc message protocol is the same as in the TIM message
protocol.
3.5.3 TIM message protocol
Description of the functions
The recording of the TIM messages is started with the TIM Message Monitor of the SINAUT
Diagnostics and Service tool. The messages received and sent by the routing server of the
TIM are recorded.
The
TIM message protocol function is used only to open a TIM message protocol for
subsequent evaluation.
Operator activities
1. Open the TIM message protocol by selecting the Project / TIM Message Protocol menu.
The
Open dialog is displayed.
2. In the file tree, select the directory and the
7DT file of the required TIM message protocol
and confirm with the
Open button. The TIM message protocol is opened in a separate
window.
Note
You activate and deactivate recording of the TIM message protocol and specify the name
and storage location of the message protocol file using the
TIM Message Monitor function
of the Diagnostics and Service tool.