Technical data

SINAUT Diagnostics and Service tool
3.5 Message protocol diagnostics
Software
System Manual, 07/2009, C79000-G8976-C222-07
399
Figure 3-35 Open dialog of the Testcopy DB function
Operator activities
1. Open the Open dialog by selecting the Project / Testcopy DB menu.
2. In the
Open dialog, select the Online option at the top right if you want to access the
TestCopyData DB directly on the CPU module. This assumes that there is a functioning
connection between the PG and the relevant CPU module.
3. In the
Entry point list box, specify Project or Accessible nodes as the project type.
4. Select the required project in the
Name list box or click on the Browse button if the project
is not available in the
Name list box.
The
Browse dialog opens with the file tree of the PG/PC. Enter the directory path in the
Search in directory input box and then click the Start search button. Select the project you
require in the
User Projects tab on the right and click on the OK button. You return to the
Open dialog.
5. On the left, in the folder list open the list of project stations by double-clicking on the
project name and then double-click to select the following:
- the required station
- its CPU module
- the S7 program and
- the block folder.
The individual objects of the selected block folder are displayed in the object list on the
right. As default, only data blocks are displayed, since the object type
data block is the
default in the
Object type list box below.
6. On the right in the object list, select the DB TestCopyData (DB99), this is entered in the
Object name input box below.
7. Confirm with
OK and the message protocol Testcopy DB opens. if the Testcopy DB does
not include any messages, a message to this effect is displayed.
Working in the open
Testcopy-DB message protocol is the same as in the TIM message
protocol.