Technical data

SINAUT Diagnostics and Service tool
3.3 SINAUT diagnostics
Software
System Manual, 07/2009, C79000-G8976-C222-07
385
● Subscriber data
● Connection data
● LAN connections
● TD7onTIM data (only TIM modules on which parameters have been set for TD7onTIM)
● Ethernet data (only TIM modules that are connected to Ethernet)
● Routing data
● Connection data (PBC)
Apart from SDB0, the representation of the SDB data for the TIM modules is in plain text (as
default), you can, however, change to hexadecimal display. The CPU DBs are always
displayed in hexadecimal and the corresponding button cannot be deactivated here.
When accessing the subscriber using the
SINAUT subscriber list , you have the option of
displaying the system data blocks from the module (
online ) or from the project ( offline ).
There may be differences between online and offline access.
The content of all system data blocks can be saved as a text file.
Figure 3-32 SDB Viewer dialog. In the example, SDB1000 - WAN data is selected.
Operator activities
1. Select a subscriber in the SINAUT subscriber list of the open project or in Accessible
Nodes
.
2. Open the
SDB Viewer dialog by selecting the SINAUT / SDB Viewer menu.