Technical data

SINAUT Diagnostics and Service tool
3.3 SINAUT diagnostics
Software
380 System Manual, 07/2009, C79000-G8976-C222-07
Table 3- 8 Comparison symbol for parameters of the TD7 check of the communication configuration
Symbol Meaning
Subcomponents exist only on CPU 1
Subcomponents exist only on CPU 2
Components on CPU 1 and 2 are different
Components are identical on both CPUs
Since parameters of the two CPU modules with the same functions are listed side by side in
the right-hand part of the
Results area, the objects of the two CPU modules must be crossed
over to compare their communication plausibility. For example, the
object number X of
CPU 1 is the
partner object number X of CPU 2 and vice versa.
The data resulting from comparing the communication configuration of two CPU modules
can be saved in an XML file. In the same way, data of an earlier comparison of the
communication configuration that was saved in an XML file can be displayed again in the
dialog using the
Load button. The previous display is then overwritten.
If you selected the wrong file when loading, an error message is displayed and the dialog
display is deleted.
Figure 3-29 CPU Program Compare Result dialog