Technical data

SINAUT Diagnostics and Service tool
3.3 SINAUT diagnostics
Software
System Manual, 07/2009, C79000-G8976-C222-07
373
The added block parameters are not included permanently in the list view and are no
longer present the next time you open the dialog.
Figure 3-26 SINAUT TD7 Block Structure dialog, Block list tab
Note
The data of the block list are required for the configuration of a SINAUT ST7cc/sc control
center and can be saved for this purpose in an XML file.
Plausibility tab
The Plausibility tab runs a series of CPU-specific plausibility checks for the selected
subscriber and displays the
Check result . The following is checked:
● Whether the
Startup SINAUT block was called correctly,
● Whether the
Safe SINAUT block needs to be called and was actually called,
● Whether the object numbers (DB numbers) of the SINAUT blocks were assigned
uniquely,
● Whether the partner numbers and partner object numbers were assigned uniquely,
● Whether the
BasicTask SINAUT block was called correctly,
● Whether the
ListGenerator SINAUT block needs to be called and was actually called.