Technical data

Configuration software for SINAUT ST7

1.5 Setting TIM module parameters

Software

System Manual, 07/2009, C79000-G8976-C222-07

1.5.6 "Interfaces" tab

Interfaces

tab

The

Interfaces

tab is available only for Ethernet TIMs. It displays a list of interfaces of the

TIM module.

Figure 1-14

Properties - TIM

dialog,

Interfaces

tab for an Ethernet TIM

If you click on an interface, the parameter boxes for the interface are displayed below the list:

● MPI

Ethernet TIMs do not have an MPI interface. If a TIM 4 is installed in an S7-300 as a CP,

it is displayed in the list of the "MPI" interface. If you select this by clicking on it with the

mouse, you can configure the internal station MPI address of the TIM using the

"Properties" button.

Note

The MPI interface is displayed only when one of the following CPU types is inserted:

• All variants of the CPUs 312, 312C, 313C, 314 and 314C

• The CPUs 315-2 DP and 315F-2 DP