Technical data

SINAUT Diagnostics and Service tool
3.3 SINAUT diagnostics
Software
362 System Manual, 07/2009, C79000-G8976-C222-07
Polling intern tab
If a TIM with master functionality is selected before opening the dialog, the Polling intern tab
displays the data of the station for for the known subscriber connected to the connected TIM
over a dedicated line.
Figure 3-20 TIM Subscriber Diagnostics dialog, Polling intern tab
By double-clicking on a subscriber in the polling list, the Disable / Enable Subscribers dialog
opens in which the configured and current enable states of the selected subscriber are
displayed from the perspective of the master TIM. The current enable status can be
changed.
If you change the status to
Disable in this dialog, the configured status is adopted again next
time the master TIM is reset.
The following functions are available only for the TIM 4R-IE:
● The settings for enabling subscribers are stored permanently.
● Using the button below the list, you store the current enable status in the STEP 7 project
of the connected PG/PC.
3.3.3 TIM diagnostic messages
Functional description
With the TIM Diagnostic Messages function, Extended diagnostic messages are activated or
deactivated and selected levels for various components of the TIM firmware. The extended