Technical data

SINAUT Diagnostics and Service tool
3.3 SINAUT diagnostics
Software
System Manual, 07/2009, C79000-G8976-C222-07
361
Dialing extern tab
If a TIM with master functionality is selected before you open the dialog, the Dialing extern
tab displays the special services and the telephone number list (dial command) of the dial-up
network driver of the connected TIM modules.
Figure 3-19 TIM Subscriber Diagnostics dialog, Dialing extern tab
The parameters Subscriber number , Special service , Call enabled and Dial command are
displayed for the listed TIM modules.
An "X" in the
Call enabled column means that the connection is enabled.
The following functions are available only for the TIM 4R-IE:
● By double-clicking on a subscriber in the dialing list, the
Disable / Enable Subscribers
dialog opens in which the configured and current enable states of the selected subscriber
are displayed from the perspective of the master TIM. The current enable status can be
changed.
● The settings for enabling subscribers are stored permanently.
● Using the button below the list, you store the current enable status in the STEP 7 project
of the connected PG/PC.