Technical data

SINAUT Diagnostics and Service tool
3.3 SINAUT diagnostics
Software
358 System Manual, 07/2009, C79000-G8976-C222-07
● Partner tab:
Displays the known partners:
– With CPU modules: Display in the known partners tab of the CPU selected in the list
of known subscribers on the left of the dialog
– With TIM modules: Display in the known partners tab of the connected TIM module
●
Dialing extern (optional):
Dial-up service and command of the connected TIM module
●
Polling intern (optional):
Data of the station poll of the partners of the connected TIM module connected over a
dedicated line with the option of disabling or enabling a connected partner
The colored symbols in the selection list of known subscribers indicate the availability of the
individual subscriber and have the following meaning:
Table 3- 2 Symbols indicating subscriber availability in subscriber diagnostics
Symbol Status
Subscriber is available, all connections OK
Subscriber is available, at least one connection is disrupted
Subscriber is not available
Operator activities
1. Select a TIM module in the SINAUT subscriber list of the open project or in Accessible
Nodes
.
2. Open the dialog by selecting the
SINAUT / TIM Subscriber Diagnostics menu.
3. Select a subscriber in the selection list of the known subscribers on the left in the dialog.
4. To display the information on
Status , Partner , Dialing extern or Polling intern , click on the
relevant tab.