Technical data

SINAUT Diagnostics and Service tool
3.3 SINAUT diagnostics
Software
354 System Manual, 07/2009, C79000-G8976-C222-07
IP Parameter tab
This tab is available only for the TIM 4R-IE.
Figure 3-15 SINAUT Diagnostics dialog, IP Parameters tab
The IP Parameters tab displays the current IP parameters and settings of the Ethernet ports:
● IP Address: Configured IP address of the module.
● Subnet Mask: Configured subnet mask of the module.
● Default router: If a default router was specified during configuration, the IP address of the
default router is displayed here.
● MAC address: MAC address of the module
● IP settings: Indicates where the module obtained the IP parameters from.
● Link Status: Indicates whether or not a physical connection to Ethernet exists.