Technical data

SINAUT Diagnostics and Service tool
3.3 SINAUT diagnostics
Software
System Manual, 07/2009, C79000-G8976-C222-07
349
The
Buffers list box shows the message buffers for various communication partners with the
following information:
●
from :
Subscriber number of the source subscriber
●
to :
Subscriber number of the destination subscriber
●
no. of messages :
Total number of stored messages for the relevant source and destination subscriber
If a message buffer is selected on the left with the mouse in the
Buffers field, the following
detailed information is displayed in the
Buffer info list:
●
from :
Subscriber number of the source subscriber
●
to :
Subscriber number of the destination subscriber
● Type:
– = 2: Buffer for organizational messages, hand-shake messages or message
transmitted from one TIM to another TIM.
– = 4: Buffer for messages to a remote subscriber (CPU or ST7cc).
– = 8: Buffer for messages to a local subscriber (CPU or ST7cc).
●
no. of messages :
Total number of stored messages for the source and destination subscriber named at the
top
●
no. of uncond. messages :
Number of stored messages to be sent unconditionally and spontaneously (only relevant
in dial-up networks)
●
no of prio. messages :
Number of stored messages to be sent with high priority.
●
flags:
Flags is a hexadecimal value that codes the buffer information following it into binary.
●
forced image mode :
All data messages are currently processed in forced image mode; in other words, even
send buffer messages are handled like image messages
●
data brake :
The sending of messages to the remote partner is currently disabled either because the
remote partner is unavailable or there is a lack of memory on the remote partner.
●
blocked:
Reserved for future functions. Nothing is currently displayed.
●
overflow warning:
Reserved for future functions. Nothing is currently displayed.
●
XGA:
Reserved for future functions. Nothing is currently displayed.