Technical data

SINAUT Diagnostics and Service tool
3.3 SINAUT diagnostics
Software
System Manual, 07/2009, C79000-G8976-C222-07
347
● In the Memory configuration field:
– Static flash EPROM
– Dynamic flash EPROM
– RAM
– Available RAM Size of the free storage space available to the drivers on the TIM for
dynamic data.
– Memory overflow: If the free RAM is no longer adequate, a checkmark appears in the
Memory overflow check box.
– Message memory: Size of the memory for data messages that can be stored
– Size of a memory block that is reserved for a data message.
– Number of possible message entries calculated based on the size of the message
memory and the size of a memory block
● In the
Disc configuration field:
– Storage space, used and free storage capacity of the flash or RAM disk.
Message buffer tab
The Message buffer tab is available only for TD7onTIM-compliant TIM modules (for example
TIM 3V-IE). The tab displays the current diagnostic data on the size and utilization of the
buffer areas for messages on the selected TIM module.
With TD7onTIM-compliant TIM modules, the message buffer is divided into various buffer
areas:
● Buffer areas for data messages sorted according to destination subscribers (destination
subscriber buffers)
● Buffer areas for messages in TIM - TIM communication (TIM buffers)
● Buffer area for local communication with the CPU or an ST7cc/sc
The
Message buffer diagnostic function analyzes the buffer areas of the destination
subscribers in which the data messages are stored. These are of particular interest to the
user.