Technical data

SINAUT Diagnostics and Service tool
3.3 SINAUT diagnostics
Software
System Manual, 07/2009, C79000-G8976-C222-07
345
3.3 SINAUT diagnostics
3.3.1 TIM Diagnostics
Description of the functions
The TIM Diagnostics function provides various diagnostic data of a TIM module. This is
displayed in the following tabs:
●
Memory tab:
Information on memory and disk configuration
●
Message buffer tab:
Information on the buffer areas of an Ethernet TIM for messages
●
Communication tab:
Displays the installed communication drivers on the various interfaces of the TIM
●
Time synchronization tab:
Status of the time-of-day synchronization on the interfaces of the TIM
●
Time tab:
Information on the system clock of the TIM
●
Filesystem :
Displays all the files in the flash file system or (if installed) on the RAM disk of the TIM
●
IP Parameters tab (TIM 4R-IE only):
Displays the current IP parameters and settings of the Ethernet ports
●
Statistics tab (TIM 4R-IE only):
Displays the transmission statistics for the Ethernet ports
Operator activities
1. Select a subscriber in the SINAUT subscriber list of the open project or in Accessible
Nodes
.
2. Open the dialog by selecting the
SINAUT / TIM Diagnostics menu.
3. Select the individual tabs with the mouse.
4. To display the interface-specific diagnostic data in the
Communication and Time
Synchronization
tabs, select the name of an interface. The information on the relevant
interface is displayed in the fields in the lower part of the two tabs.
– In the
Communication tab: Select an interface in the Communication drivers list box.
– In the
Time Synchronization tab: Select an interface in the Communication interfaces
for time synchronization
list box