Technical data

SINAUT Diagnostics and Service tool
3.2 STEP 7 diagnostics
Software
344 System Manual, 07/2009, C79000-G8976-C222-07
3. Click on the Stop button to stop the module.
4. Click on the
Warm Restart button to restart the module.
A TIM goes through a warm restart after approximately 10 seconds.
3.2.4 Setting the time
Description of the functions
The Set Time of Day function is used to display and set the date and time of a module. It is
possible to set the module time to the PG/PC time or to set an edited time.
CPU modules have a hardware clock.
TIM modules have a software clock in the operating system of the module.
Figure 3-8 Set Time of Day dialog
Operator activities
1. Select a subscriber in the SINAUT subscriber list of the open project or in Accessible
Nodes
.
2. Open the dialog by selecting the
STEP 7 Diagnostics / Set Time of Day menu.
3. To set the module time manually, click in the date or time display with the mouse, change
the data and/or time using the keyboard and confirm by clicking the
Apply button
or or select the
Apply from PG/PC option in the Module time field and confirm by clicking
the
Apply button.