Manualshelf

Technical data

ManualsBrandsMatrix ManualsKitchen AppliancesMD720
341342343344345346347348349350
SINAUT Diagnostics and Service tool
3.2 STEP 7 diagnostics
Software
342 System Manual, 07/2009, C79000-G8976-C222-07
Network Connection
tab
The
Network Connection
tab for an Ethernet TIM displays the MAC address of the module
and information on the status and settings of the Ethernet port:
● Link Status: Indicates whether or not a physical connection to Ethernet exists.
● Settings: Shows the setting for detecting network settings, here: "Automatic"
(Autosensing)
● Mode: Indicates the transmission speed and duplexity on Ethernet.
Figure 3-6
Module Information
dialog,
Network Connection
tab
Note
With a TIM 4R-IE, only information on the first Ethernet port P1 is displayed. For an
overview of the status and parameters of both Ethernet ports of the module, refer to
SINAUT Diagnostics,
IP Parameters
tab.
Statistics
tab
This tab is available only for Ethernet TIMs.
The
Statistics
tab contains transmission statistics for the Ethernet ports. The number of
transferred data packets with and without errors since the last reset or restart of the module