Technical data

SINAUT Diagnostics and Service tool
3.2 STEP 7 diagnostics
Software
System Manual, 07/2009, C79000-G8976-C222-07
341
● Default router: If a default router was specified during configuration, the IP address of the
default router is displayed here.
● IP settings: Indicates where the module obtained the IP parameters from.
Figure 3-5 Module Information dialog, IP Parameter tab
Note
With a TIM 4R-IE, only information on the first Ethernet port P1 is displayed. For an
overview of the status and parameters of both Ethernet ports of the module, refer to
SINAUT Diagnostics,
IP Parameters tab.