Technical data

SINAUT Diagnostics and Service tool
3.1 Overview of the functions and operation of the SINAUT Diagnostics and Service tool
Software
334 System Manual, 07/2009, C79000-G8976-C222-07
The following table shows the diagnostic and service functions and all the menus in which
the functions of the SINAUT Diagnostics and Service tool can be called.
The two right-hand columns in the table indicate that the scope of information when using
the
SINAUT subscriber list of a STEP 7 project is greater than when using accessible nodes .
Table 3- 1 Overview of the diagnostic and service functions of the SINAUT Diagnostics and Service
tool
Function group,
diagnostic function
(remarks)
Subscriber type
relevant for
diagnostics
Called in
menu
Access over
STEP 7
project
Access
using
Accessible
Nodes
STEP 7 diagnostics STEP 7
diagnostics
CPU messages CPU, TIM " X X
Module information (including
messages in diagnostic buffer)
CPU, TIM " X X
Operating mode CPU, TIM " X X
Setting the time CPU, TIM " X X
SINAUT
SINAUT diagnostics SINAUT
TIM Diagnostics TIM " X X
TIM subscriber diagnostics TIM " X X
TIM diagnostic messages TIM " X
TIM Message Monitor TIM " X
TD7 software diagnostics SINAUT
TD7 CPU diagnostics (TD7
messages in diagnostics buffer)
CPU " X X
TD7 block structure
(configured data)
CPU " X
TD7 block structure for all CPUs
(configured data)
CPU " X
TD7 CPU program comparison
(configured data)
CPU " X
TD7 communication configuration
check (configured data)
CPU " X
TD7onTIM diagnostics TIM " X
SDB Viewer CPU, TIM " X X
Service functions SINAUT
Download SDB TIM " X
Firmware update TIM " X
Repair TIM " X
Message protocol diagnostics Project
Testcopy DB CPU " X X
TIM message protocol TIM " X X
ST7cc / ST7sc message protocol TIM " X X
The diagnostic information is displayed only for SIMATIC CPU modules and SINAUT TIM modules.