Technical data

SINAUT Diagnostics and Service tool
3.1 Overview of the functions and operation of the SINAUT Diagnostics and Service tool
Software
330 System Manual, 07/2009, C79000-G8976-C222-07
Access using Accessible Nodes
To access the diagnostic data using Accessible Nodes , follow the steps outlined below:
1. Click on the
Accessible Nodes button
or click on the
Project / Accessible Nodes menu.
The
Accessible Nodes dialog opens.
2. In the
Selectable Nodes dialog, select the required subscriber from the list of MPI
addresses by clicking on it with the mouse.
Figure 3-1 The Accessible Nodes dialog of a sample installation
Access using the SINAUT subscriber list of a STEP 7 project
To open the STEP 7 project in the Diagnostics and Service tool and to access the diagnostic
data using the
SINAUT subscriber list , follow the steps outlined below:
1. Click on the
Open Project button in the toolbar or select the Project / Open menu. The
Open dialog is displayed.
2. Select the STEP 7 project in the
User Projects tab of the Open dialog and click on the OK
button. The project window with the
SINAUT subscriber list of the relevant project opens.