Technical data

SINAUT TD7 software package for the CPU
2.6 Blocks for optional expansion
Software
320 System Manual, 07/2009, C79000-G8976-C222-07
Mobile network
Status information valid for the mobile network access to the SMS-C via an M20 module.
The following status entries are possible:
1. Job monitoring time has expired, SMS could not be sent in time to the SMS-C.
Status, fixed network, mobile network
2. SMS not yet sent to SMS-C.
Status, fixed network
Comes as a response to a status request; cannot be requested for a mobile network
access.
3. SMS saved in SMS-C but not yet delivered to the mobile phone.
Status, fixed network
This status cannot be requested for a mobile network access.
4. SMS successfully delivered to the mobile phone.
Pulse, fixed network
Counts as a ’completed without error’ message.
5. SMS cannot be delivered to the mobile phone.
Pulse, fixed network
Counts as a ’ended with error’ message.
6. SMS successfully delivered to the SMS-C.
Pulse / status, mobile network
Pulse for messages not requiring acknowledgement. Counts then as a ’completed without
error’ message.
Status for messages requiring acknowledgment. The TIM waits for an acknowledgment
or a delete job. Does not count as a ’completed’ message.
7. SMS acknowledged by mobile phone.
Pulse, mobile network
Counts as a ’completed without error’ message.
8. SMS could not be sent in time to the SMS-C.
Status, mobile network
The TIM repeats the transmission until the SMS can be delivered or the SMS is deleted.
Possible causes are:
– "ERROR" message from M20 module
– Monitoring time on the TIM has expired (the M20 module did not answer).
– Disruption in the GSM network
9. SMS successfully deleted.
Pulse, fixed network, mobile network
Response of the TIM to a global delete job transferred by the CPU to the TIM. The TIM
sends a separate status message 9 to the CPU for every SMS task deleted on the TIM.
With a fixed network connection the SMS message is deleted in the SMS-C and in the
administration of the TIM.
With mobile network access it is not possible to delete the message in the SMS-C. It is
only deleted in the TIM administration.
10. No entries to be deleted or all entries deleted.
Pulse, fixed network, mobile network
Response of the TIM to a global delete job transferred by the CPU to the TIM. In this
case all entries for a DB SMS_Data
are deleted or there are no entries for this DB SMS_Data.