Technical data

SINAUT TD7 software package for the CPU
2.6 Blocks for optional expansion
Software
302 System Manual, 07/2009, C79000-G8976-C222-07
Name: ResetError
Declaration: INPUT
Data type BOOL
Explanation Input for resetting the GlobalCmdOutputError output.
Range of
values:
Input
Bit memory
Data bit
I 0.0 ... I n.7
M 0.0 ... M n.7
L 0.0 ... L n.7
DBm.DBX 0.0 ... n.7
If the parameter is not required, specify a memory bit or data bit that always
has signal 0.
For more detailed information on this parameter, refer to the section
Function.
Name: InputOK
Declaration: OUTPUT
Data type BOOL
Explanation Hardware command or setpoint entry has been executed correctly.
Range of
values:
Output
Bit memory
Data bit
Q 0.0 ... I n.7
M 0.0 ... M n.7
L 0.0 ... L n.7
DBm.DBX 0.0 ... n.7
If the parameter is not required, specify a memory bit or data bit that can be
used as a scratchpad memory.
For more detailed information on this parameter, refer to the section
Function.
Name: InputError
Declaration: OUTPUT
Data type BOOL
Explanation An error has occurred related to the hardware command or setpoint input.
Range of
values:
Output
Bit memory
Data bit
Q 0.0 ... I n.7
M 0.0 ... M n.7
L 0.0 ... L n.7
DBm.DBX 0.0 ... n.7
If the parameter is not required, specify a memory bit or data bit that can be
used as a scratchpad memory.
For more detailed information on this parameter, refer to the section
Function.
Name: GlobalCmdOutputError
Declaration: OUTPUT