Technical data

SINAUT TD7 software package for the CPU
2.5 Data point typicals
Software
System Manual, 07/2009, C79000-G8976-C222-07
241
Name: AnalogInput_1 ... _4
Declaration: INPUT
Data type WORD
Default: 0 (W#16#0)
Explanation Analog input word.
Range of
values:
I/O words
Memory words
Data words
PIW0 ... PIWn
MW0 ... MWn
LW0 ... LWn
DBm.DBW0 ... n
For each analog value to be transmitted in the data message, you can
specify from where the FB will take the analog information. I/O words from
analog input modules, data words from a data block and memory words can
be mixed as required.
If you do not require parameters, simply leave them open. The value 0 is
transferred for these analog inputs in the message.
Name: SamplingPeriod
Declaration: INPUT
Data type INT
Default: 500
Explanation Acquisition interval for analog inputs in ms.