Technical data

SINAUT TD7 software package for the CPU
2.5 Data point typicals
Software
System Manual, 07/2009, C79000-G8976-C222-07
237
Explanation of the parameters
Names: PartnerNo
PartnerObjectNo
Enabled
ImageMemory
Conditional
Unconditional
Permanent
Refer to
Parameters you require often (Page 223).
Name: TimeStamp
Declaration, data type , default and range of values: Refer to
Parameters you require often
(Page
223).
Explanation Time stamp
Here, you specify whether the message is transferred with the time stamp.
The prerequisite is that the time provided by the local TIM is available on the
PLC. For more detailed information, refer to the description of FC TimeTask.
The following applies to the time stamp in the message;
• MeanValueGeneration = FALSE (instantaneous values are transmitted in
the message)
The time stamp in the message is identical to the time of acquisition of
the instantaneous values contained in the message.
• MeanValueGeneration = TRUE (the message contains mean values)
The time stamp is identical to the time at which the mean value
calculation period was completed. The start of the mean value calculation
period is not included in the message. This is, however, identical to the
time stamp of the previously transferred mean value message.
If no parameter is specified, the default is FALSE; in other words, data is
transmitted without a time stamp.
Name: ThresholdIntegration
Declaration: INPUT
Data type BOOL
Default: FALSE
Explanation Threshold value processing according to the integration principle.